5
Model assembly
EN
Rear fuselage installation
1.Thread the extension wire from front fuselage through
the rear fuselage trough, align and install the rear
fuselage to the rear of the front fuselage in the corre-
sponding slot as shown.
2.Use the flap channel of the remote control to open the
airbrake and use the included screws （HKM3.0*10mm
x 2） to secure the rear fuselage horizontally into place.
3.With the bottom of the fuselage facing up, Secure the
front and rear fuselage using the included screws
(HKM3.0*10mm x 1) .
HKM3.0*10mm
HKM3.0*10mm
To Next Page
Loading...
