Focusrite Audio Engineering vocaster one studio - Vocaster One Rear Panel Hardware Features; Rear Panel Connectivity Ports; Microphone XLR Input Port; Front Panel Headphone Jack

focusrite.com Tell the world 28
Press to turn Vocaster One on and off.
USB 3.0 port – Type C connector; connect to your
laptop or computer with the USB cable supplied.
Kensington security slot – make your Vocaster One
secure using a Kensington lock.
3.5 mm TRS jack socket for connecting Vocaster One to
the external audio input of a video camera.
3.5 mm TRRS jack socket for a wired connection to a
compatible phone.
Outputs L and R – for connecting to monitor
loudspeakers. Two ¼’ TRS jack sockets; electronically
balanced. Either ¼’ TRS (balanced connection) or TS
(unbalanced connection) jack plugs can be used.
Phantom power switch for microphone input – press to
enable 48V phantom power at the XLR socket.
XLR socket for connecting a microphone
On the front:
Headphones output socket. Connect your headphones
here. If your headphones use a 3.5mm jack then you
need to use a 3.5mm to ¼’ jack adaptor.
HARDWARE FEATURES
Rear Panel