Focusrite Clarett 4Pre - Clarett 4 Pre Technical Specifications; Performance Specifications

17
CLARETT 4PRE TECHNICAL SPECIFICATIONS
Performance Specifications
Configuration
Inputs 18: analogue (8), S/PDIF (2), ADAT (8)
Outputs 8: analogue (4), S/PDIF (2), HP (2)
Mixer Fully assignable 26-in/10-out mixer
Digital Performance
Supported sample rates 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz & 192 kHz
Microphone Inputs
Frequency Response 20 Hz - 20 kHz +/-0.1 dB
Dynamic Range 118 dB (A-weighted)
THD+N 0.001%
Noise EIN –128 dBu (A-weighted)
Maximum input level +18 dBu
Gain Range 57 dB
Impedance AIR Off: 6.2k Ω - AIR On: 2.2k Ω
Line Inputs
Frequency Response 20 Hz - 20 kHz +/-0.1 dB
Dynamic Range 116 dB (A-weighted)
THD+N 0.005%
Maximum input level Inputs 1-4
(Fixed Line Inputs 5-8)
+26 dBu
(+10dBu)
Gain Range +57 dB
Impedance >50k Ω
Instrument Inputs
Frequency Response 20 Hz - 20 kHz +/-0.1 dB
Dynamic Range 111 dB (A-weighted)
THD+N 0.001%
Maximum input level +14 dBu
Gain Range +57 dB
Impedance >2M Ω
Line Outputs
Dynamic Range 117 dB
THD+N 0.0007%
Maximum Output Level (0 dBFS) +18 dBu, balanced
Headphone Outputs
Dynamic Range 112 dB
THD+N 0.0008%
Maximum Output Level +16 dBu