Need help?Do you have a question about the Focusrite Clarett 2Pre and is the answer not in the manual?
General| Type | Audio Interface |
|---|---|
| Number of Mic Preamps | 2 |
| Phantom Power | Yes |
| Digital Inputs | 1 x Optical Toslink (ADAT) |
| Digital Outputs | 1 x Optical Toslink (ADAT) |
| Headphones | 1 x 1/4" |
| USB | 1 x USB-C |
| Simultaneous I/O | 10 x 4 |
| A/D Resolution | 24-bit/192kHz |
| MIDI I/O | No |
| Analog Inputs | 2 x XLR-1/4" combo |
| Power Supply | USB bus powered or external power supply |
| Software | Focusrite Control |
Provides an introduction to the Clarett 2Pre audio interface, its features, and benefits.
Details the hardware interface capabilities, including analogue and digital connectivity options.
Lists the items included in the Clarett 2Pre hardware package upon purchase.
Provides information on computer and operating system compatibility for the Clarett 2Pre.
Guides through the process of downloading and installing necessary software and drivers for the unit.
Details the front and rear panel controls, connectors, and indicators of the Clarett 2Pre unit.
Instructions for connecting the Clarett 2Pre to a computer and configuring audio settings.
Illustrates typical use cases and connection setups for recording and monitoring.
Details the audio performance metrics, including frequency response, dynamic range, and input levels.
Outlines the physical dimensions, weight, and electrical connectivity details of the unit.
To Next Page