Focusrite Clarett 2Pre User Manual

15
FOCUSRITE CONTROL - OVERVIEW
Focusrite Control is the software application used with the Clarett 2Pre. It allows you to create
a custom monitor mix for each musician, and also to specify the routing of all audio signals to
the physical audio outputs. All sample rate selection, digital syncing and buffer size settings
(Windows only) are available from Focusrite Control.
Note: Focusrite Control is also used with other hardware interfaces in the Focusrite range.
When you connect an interface to your computer and launch Focusrite Control, the model
of interface is automatically detected, and the software congured to suit the number of
inputs and outputs, and other features, available on the hardware.
Focusrite Control has its own, dedicated User Guide, which contains detailed operating
instructions for all aspects of the software. This may be downloaded from:
focusrite/downloads.

Focusrite Clarett 2Pre Specifications

General

Type	Audio Interface
Number of Mic Preamps	2
Phantom Power	Yes
Digital Inputs	1 x Optical Toslink (ADAT)
Digital Outputs	1 x Optical Toslink (ADAT)
Headphones	1 x 1/4"
USB	1 x USB-C
Simultaneous I/O	10 x 4
A/D Resolution	24-bit/192kHz
MIDI I/O	No
Analog Inputs	2 x XLR-1/4" combo
Power Supply	USB bus powered or external power supply
Software	Focusrite Control