Focusrite Clarett 2Pre User Manual

16
CLARETT 2PRE TECHNICAL SPECIFICATIONS
Performance Specifications
Configuration
Inputs 10: analogue (2), ADAT (8)
Outputs 4: analogue
Mixer Fully assignable 20-in/6-out mixer
Digital Performance
Supported sample rates 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz & 192 kHz
Microphone Inputs
Frequency Response 20 Hz - 20 kHz +/-0.1 dB
Dynamic Range 119 dB (A-weighted)
THD+N 0.001%
Noise EIN –128 dBu (A-weighted)
Maximum input level +18 dBu
Gain Range 57 dB
Impedance AIR Off: 6.2k Ω - AIR On: 2.2k Ω
Line Inputs
Frequency Response 20 Hz - 20 kHz +/-0.1 dB
Dynamic Range 118 dB (A-weighted)
THD+N 0.001%
Maximum input level +26 dBu
Gain Range +57 dB
Impedance >50k Ω
Instrument Inputs
Frequency Response 20 Hz - 20 kHz +/-0.1 dB
Dynamic Range 116 dB (A-weighted)
THD+N 0.001%
Maximum input level +14 dBu
Gain Range +57 dB
Impedance >2M Ω
Line and Monitor Outputs
Dynamic Range (Line Outputs) 119 dB
Dynamic Range (Monitor Outputs) 118 dB
THD+N 0.0007%
Maximum Output Level (0 dBFS) +16 dBu, balanced
Headphone Outputs
Dynamic Range 116 dB
THD+N 0.0008%
Maximum Output Level +16 dBu

Focusrite Clarett 2Pre Specifications

General

Type	Audio Interface
Number of Mic Preamps	2
Phantom Power	Yes
Digital Inputs	1 x Optical Toslink (ADAT)
Digital Outputs	1 x Optical Toslink (ADAT)
Headphones	1 x 1/4"
USB	1 x USB-C
Simultaneous I/O	10 x 4
A/D Resolution	24-bit/192kHz
MIDI I/O	No
Analog Inputs	2 x XLR-1/4" combo
Power Supply	USB bus powered or external power supply
Software	Focusrite Control