Need help?Do you have a question about the Focusrite Clarett 4Pre USB and is the answer not in the manual?
General| Gain | 57 dB |
|---|---|
| Control type | Buttons, Rotary |
| Sample rates | 44.1 - 192 kHz |
| On/off switch | Yes |
| Phantom power | 48 V |
| Product color | Black |
| LED indicators | Power, Signal strength, USB |
| Frequency range | 20 - 35000 Hz |
| Built-in display | No |
| Mac operating systems supported | Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan |
| Total Harmonic Distortion (THD) | 0.001 % |
| Windows operating systems supported | Windows 10, Windows 7, Windows 8.1 |
| USB port type | USB Type-C |
| USB ports quantity | 1 |
| 6.35 mm (1⁄4-inch) input | 4 |
| 6.35 mm (1⁄4-inch) output | 6 |
| DC output voltage | 12 V |
Weight and Dimensions| Depth | 192 mm |
|---|---|
| Width | 222 mm |
| Height | 63.5 mm |
| Weight | 1350 g |
Welcome and overview of the Clarett 4Pre USB audio interface, its purpose, and benefits.
Details the process of downloading and installing necessary software and drivers for the Clarett 4Pre USB.
Describes the controls and indicators located on the front panel of the Clarett 4Pre USB.
Details the various connectors and switches found on the rear panel of the Clarett 4Pre USB.
Guides on selecting the Clarett 4Pre USB as the audio device in the computer's operating system.
Explains how to configure the Clarett 4Pre USB within your Digital Audio Workstation (DAW).
Illustrates a typical setup for multitrack recording of an acoustic band.
Lists detailed performance metrics for the Clarett 4Pre USB, including frequency response and dynamic range.
Outlines the physical dimensions, weight, and electrical properties of the Clarett 4Pre USB.
To Next Page