Need help?Do you have a question about the Focusrite Clarett 2Pre USB and is the answer not in the manual?
General| Gain | 57 dB |
|---|---|
| Control type | Buttons, Rotary |
| Sample rates | 44.1 - 192 kHz |
| On/off switch | Yes |
| Phantom power | 48 V |
| Product color | Black |
| LED indicators | Power, Signal strength, USB |
| Frequency range | 20 - 35000 Hz |
| Built-in display | No |
| Mac operating systems supported | Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan |
| Windows operating systems supported | Windows 10, Windows 7, Windows 8.1 |
| XLR inputs | 2 |
| USB port type | USB Type-C |
| Digital audio optical out | 1 |
| 6.35 mm (1⁄4-inch) output | 5 |
| DC output voltage | 12 V |
Weight and Dimensions| Depth | 161 mm |
|---|---|
| Width | 210 mm |
| Height | 55 mm |
| Weight | 1360 g |
Introduces the Clarett 2Pre USB audio interface and its capabilities.
Highlights the need for both the User Guide and Focusrite Control Software Guide.
Explains connecting mics, instruments, MIDI, and general audio routing.
Details the AIR function for emulating classic preamps and its sonic effect.
Describes Focusrite Control software and the iOS control app.
Lists package contents and available software downloads.
Advises checking the website for up-to-date compatibility info.
Guides on downloading and installing Focusrite Control and drivers.
Explains the process of registering the product online.
Describes the front panel layout, controls, and indicators.
Explains the gain controls, INST mode, and AIR function LEDs.
Details the monitor output level control and power status LED.
Details the analogue line outputs and digital optical input port.
Describes USB-C, MIDI I/O, DC power input, and security slot.
Guides on selecting the Clarett 2Pre USB as the audio device in OS.
Details selecting the device within Digital Audio Workstation software.
Shows how to connect self-powered monitors directly.
Explains connecting to separate amplifiers for passive speakers.
Explains anti-thump circuitry and safe power-on sequence for speakers.
Illustrates a typical multitrack recording setup with mic and guitar.
Explains custom monitor mixes and low-latency monitoring techniques.
Details using the ADAT port for additional audio inputs via TOSLINK.
Covers synchronizing devices and routing optical inputs.
Explains configuring and using the unit as a stand-alone pre-amp.
Introduces Focusrite Control software and its iOS companion app.
Describes creating monitor mixes and routing audio signals.
Lists configuration, supported sample rates, and digital performance.
Details frequency response, dynamic range, and input levels for inputs.
Covers line, monitor, and headphone output specifications.
Describes input/output connectors, switching, and other I/O.
Provides physical dimensions and weight of the unit.
Directs users to the Focusrite Help Centre for support.
Lists registered trademarks and copyright information.
To Next Page