Focusrite Clarett 2Pre USB User Manual

5
Box Contents
Along with your Clarett 2Pre USB you should have:
• External 12 V DC mains Power Supply Unit (PSU)
• USB-C to USB-A cable
• USB-C to USB-C cable
Focusrite Control is available at focusrite.com/downloads. On Windows, Focusrite Control will
also install the driver required. Mac users: Clarett 2Pre USB is class-compliant on Macs, therefore
no drivers are required.
As a Clarett owner, you are also entitled to a selection of third-party software. To nd out what’s
included, go to:
focusrite.com/usb-c-audio-interface/clarett-usb/clarett-2pre-usb
System Requirements
IMPORTANT – Please visit the following link for up-to-date information on computer and
operating system compatibility for all Clarett products:
support.focusrite.com

Focusrite Clarett 2Pre USB Specifications

General

Gain	57 dB
Control type	Buttons, Rotary
Sample rates	44.1 - 192 kHz
On/off switch	Yes
Phantom power	48 V
Product color	Black
LED indicators	Power, Signal strength, USB
Frequency range	20 - 35000 Hz
Built-in display	No
Mac operating systems supported	Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan
Windows operating systems supported	Windows 10, Windows 7, Windows 8.1
XLR inputs	2
USB port type	USB Type-C
Digital audio optical out	1
6.35 mm (1⁄4-inch) output	5
DC output voltage	12 V

Weight and Dimensions

Depth	161 mm
Width	210 mm
Height	55 mm
Weight	1360 g