Focusrite Clarett 2Pre USB - Important Speaker Connection Advice; Anti-Thump and Power Sequence

12
Main
Monitor
Speakers
Additional
Monitor
Speakers
IMPORTANT:
LINE OUTPUTS 1 and 2 incorporate “anti-thump” circuitry that protects your speakers if
the Clarett 2Pre USB is turned on while the speakers (and amplier if used) are connected
and active.
LINE OUTPUTS 3 and 4 do not have this circuitry.
If you’re using additional speakers connected to these outputs, we recommend you
power your Clarett 2Pre USB on rst, then turn on the speakers or power amplier.
But get into the habit of following the general rule in any case - it is
always good
audio practice to turn on a speaker system of any kind
after turning on the equipment
feeding it.