Focusrite Clarett 4Pre USB User Manual

17
FOCUSRITE CONTROL - OVERVIEW
Focusrite Control is the software application used with the Clarett 4Pre USB. It allows you to create
a custom monitor mix for each musician, and also to specify the routing of all audio signals to the
physical audio outputs. All sample rate selection, digital syncing and buffer size settings (Windows
only) are available from Focusrite Control.
Note: Focusrite Control is compatible with other hardware interfaces in the Focusrite
product range. When you connect your Clarett 4Pre USB to your computer and launch
Focusrite Control, the model of interface is automatically detected, and the software
correctly configured to suit the hardware.
Focusrite Control has its own, dedicated User Guide, which contains detailed operating
instructions for all aspects of the software. This may be downloaded from
www.focusrite.com/downloads.

Focusrite Clarett 4Pre USB Specifications

General

Gain	57 dB
Control type	Buttons, Rotary
Sample rates	44.1 - 192 kHz
On/off switch	Yes
Phantom power	48 V
Product color	Black
LED indicators	Power, Signal strength, USB
Frequency range	20 - 35000 Hz
Built-in display	No
Mac operating systems supported	Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan
Total Harmonic Distortion (THD)	0.001 %
Windows operating systems supported	Windows 10, Windows 7, Windows 8.1
USB port type	USB Type-C
USB ports quantity	1
6.35 mm (1⁄4-inch) input	4
6.35 mm (1⁄4-inch) output	6
DC output voltage	12 V

Weight and Dimensions

Depth	192 mm
Width	222 mm
Height	63.5 mm
Weight	1350 g