Focusrite iTrack Solo User Manual

11
Once the iTrack Solo is set as the preferred Audio Device* in your DAW, Inputs 1 & 2 and Outputs 1 &
2 will appear in your DAW’s Audio I/O preferences. Depending on your DAW, you may need to enable
certain inputs or outputs before use. The two examples below show Inputs 1 & 2 and Outputs 1 & 2
enabled in the Ableton Lite Audio Preferences.
*Typical name. Terminology may differ slightly between DAWs.

Focusrite iTrack Solo Specifications

General

Sample rate	98 kHz
Audio quality	24 bit
Frequency range	20 - 20000 Hz
Microphone maximum input	1
Microphone Total Harmonic Distortion (THD)	0.002 %
XLR in	Yes
I/O ports	2x XLR In, 6.35mm In, USB2.0 B, TRS Out, 2x RCA Out
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Product color	Black
Compatible operating systems	- Windows 7 / 8\\r - Mac OS X 10.7 / 10.8

Weight and Dimensions

Weight	500 g
Dimensions (WxDxH)	150 x 100 x 45 mm