C SERIES USER’S MANUAL
2
Preface
Preface
Chapter One Standard Parts
1.1 Standard Accessories with Cutter………………………………………………………….5
1.1.2 C48 Sketch for Vertical Stands Installation…………………………………………..…6
1.2 Optional Accessories……………………………………………………………………...…6
1.2.1 Software……………………………………………………………………………………6
1.2.2 C24 Stand Installation Sketch………………………………………………………...….7
Chapter Two Safety Precaution
2.1 Safety Precaution…………………………………………………………………………...8
Chapter 3 Features
Product Parameters……………………………………………………………………………11
Chapter Four Parts Name and Function
4.1 Front View（C-24）……………………………………………………………………….12
4.2 Back View（C-24）……………………………………………………………………...…...12
4.3 Control Panel……………………………………………………………………………....13
Chapter Five Cutter Installation
5.1 Installation and connection………………………………………………………………..14
5.1.1 Cutting Environment…………………………………………………………………....14
5.1.2 Connect signal cable to the PC. ………………………………………………………...14
5.1.3 USB Driver Installation. ………………………………………………………………...15
5.1.4 Power Cable Connection. ……………………………………………………………….15
5.2 Cutting Media Installation. ……………………………………………………………….15
5.3 Tools Installation.. ………………………………………………………………................16
5.4 Plot Pen Installation……………………………………………………………….........…17
Chapter Six General Settings and Operation
6.1 Work Status Descriptions……………………………………………………………….....18
6.1.1 Online/Offline………………………………………………………………....................18
6.1.2 Carriage Movement. ……………………………………………………………….........18
6.1.3 Original Point Setting………………………………………………………………........19
6.1.4 Bounded system.. ………………………………………………………………..............20
6.2 Online Keyboard Function Definition. …………………………………………….…….20
6.3 Offline Status Description. ………………………………………………………………..21
6.4 Menu Operation Description……………………………………………………………...22
6.4.1 Power on Display………………………………………………………………...............22
6.4.2 Online/Offline Operation………………………………………………………………..22
To Next Page
Loading...
