Need help?Do you have a question about the Foison C30 and is the answer not in the manual?
Explains warning symbols and general safety precautions.
Explains the functions of each button and the LCD display on the control panel.
Guides on setting up the cutting environment and connecting the cutter.
Provides step-by-step instructions for installing the USB driver.
Details the process of installing and adjusting cutting tools and blades.
Explains how to adjust the protruding length of the knife for optimal cutting.
Guides on performing trial runs to adjust knife press and tool settings.
Details how to switch between Online and Offline modes and their uses.
Guides on setting the original point for the cutting carriage.
Explains how to navigate and operate the cutter's menu system.
Describes how to switch between online and offline modes for operation.
Guides on adjusting the cutting speed and knife force.
Explains how to adjust speed and force while the cutter is working online.
Explains how to set the X and Y scale for accurate cutting.
Addresses issues with character deformation during plotting.
Explains causes and solutions for zigzag patterns during cutting.
To Next Page
General