C SERIES USER’S MANUAL
2
Preface
Preface
Chapter One Standard Parts
1.1 Standard Accessories with Cutter…………………………………………………………5
1.1.1 Accessories list…………………………………………………………………………….5
1.1.2 C48 Sketch for Vertical Stands Installation……………………………………………..6
1.2 Optional Accessories………………………………………………………………………..6
1.2.1 Software…………………………………………………………………………………...6
1.2.2 Blade holder and the knife……………………………………………………………….7
1.2.3 C24 Stand Installation Sketch……………………………………………………………7
Chapter Two Safety Precaution
2.1 Safety Precaution……………………………………………………………………………8
Chapter 3 Features
Product Parameters……………………………………………………………………………11
Chapter Four Parts Name and Function
4.1 Front View ( C-24 )………………………………………………………………………...12
4.2 Back View ( C-24 )…………………………………………………………………………13
Chapter Five Cutter Installation
5.1 Installation and connection……………………………………………………………….14
5.1.1 Cutting Environment……………………………………………………………………14
5.1.2 Connect signal cable to the PC. ………………………………………………………...14
5.1.3 USB Driver Installation. ………………………………………………………………...15
5.1.4 Power Cable Connection. ……………………………………………………………….15
5.2 Cutting Media Installation. ……………………………………………………………….15
5.3 Tools Installation.. …………………………………………………………………………17
5.4 Plot Pen Installation……………………………………………………………………….18
Chapter Six General Settings and Operation
6.1 Work Status Descriptions………………………………………………………………….19
6.1.1 Online/Offline.……………………………………………………………………………19
6.1.2 Carriage Movement. …………………………………………………………………….19
6.1.3 Original Point Setting……………………………………………………………………20
6.1.4 Bounded system………………………………………………………………………….20
6.1.5 Back to the original point automatically……………………………………………….21
6.1.6 Reset Default parameter………………………………………………………………...21
6.2 Online Keyboard Function Definition……………………………………………………21
6.3 Offline Status Description…………………………………………………………………22
To Next Page
Loading...
