Need help?Do you have a question about the Foison C48 and is the answer not in the manual?
Lists standard accessories included with the cutter.
Diagram showing the installation of vertical stands for the C48 model.
Details optional accessories available for purchase.
Lists available software options such as Artcut, Flexi, and PCSIGN.
Provides a diagram for installing the stand on the C24 model.
Explains warning symbols and essential safety measures for operating the cutter.
Details technical specifications and performance parameters of the cutting plotter.
Identifies external components of the C-24 model from the front.
Identifies external components of the C-24 model from the back.
Explains the functions of each button and the LCD display on the control panel.
Guides on setting up the cutting environment and connecting the cutter to a PC.
Specifies ideal conditions and locations for installing the cutting plotter.
Details how to connect the cutter to a computer using signal cables.
Instructions for installing the necessary USB driver for computer connection.
Steps for connecting the power cable to the cutter and power source.
Provides guidance on loading and preserving cutting media for optimal performance.
Instructions for installing cutting tools, including knife adjustment and trial runs.
Introduces tools and their applications with angle specifications.
Explains how to perform trial runs for knife adjustment and press settings.
Describes the process of installing and using the plot pen for drawing.
Explains different operational states like Online and Offline status.
How to switch between online and offline modes and their implications.
Details how to control carriage movement using the control panel buttons.
Procedure for setting the starting point for cutting operations.
Explains the function of the bounded system to prevent collision.
Defines the functions of buttons when operating the cutter online.
Describes the functions of buttons and operations when the cutter is in offline mode.
Overview of menu operations and screen displays on the cutter.
Shows the initial display and default settings upon powering on the cutter.
How to switch between online and offline modes for different operations.
Guides on adjusting cutting speed and knife force.
Instructions for performing a test to check knife drop and raise functionality.
Steps for performing a test cut of a rectangle.
How to use the pause button to temporarily stop and resume cutting.
Adjusting speed and force while the cutter is actively working.
How to repeat the last job performed by the cutter.
Configuration of communication ports and baud rates for PC connection.
Adjusting X and Y axis scaling for accurate cutting.
Setting parameters within ARTCUT software for outputting designs.
Adjusting compensation settings for character deformation and sharp angles.
Solves deformation issues with small characters by adjusting software compensation.
Addresses zigzag patterns by recommending appropriate speed settings for different character sizes.
Troubleshoots paper deviation issues by checking roller alignment and pressure.
Identifies causes of machine lock-up, such as voltage issues, and suggests solutions.
Addresses static or tingling sensations by recommending proper grounding of the machine.
Improves job smoothness by checking knife protrusion and wear.
Solves display issues by checking power and voltage levels.
Fixes stroke closure issues by adjusting 'closing compensation' in software.
Resolves missing letters during cutting by checking pressure, software, and knife head.
Provides guidelines for daily cleaning and long-term maintenance of the cutting plotter.
Guides on preparing and outputting designs from CorelDraw software.
Details the installation process for CorelDraw and its associated print drivers.
Instructions for setting communication ports and managing USB drivers.
General| Category | Cutting Plotter |
|---|---|
| Resolution | 0.025 mm |
| Interface | USB |
| Power Supply | AC90~240V / 50~60Hz |
| Control Panel | LCD Display |
| Motor Type | Stepper |
To Next Page
