C SERIES USER’S MANUAL
23
6.4 Menu Operation Description
6.4.1 Power on Display
Ver 5.01L : The cutter program version is 5.01L
The default value: Speed V=400mm, Knife Force f=30
6.4.2 Online/Offline Operation
When the cutter switch on the first time, it will initialize and then the cutter will be in Online
status. Press “Online” can switch it into Online/Offline status. When cutter transmits data to
computer, the cutter must be Online. While it needs to set cutter’s parameters and manual
operation, it must be Offline. The LCD shows as followings:
Online status
Offline status
To Next Page
Loading...
