C SERIES USER’S MANUAL
22
The left and right herein refer to the person stands in front of the cutter. The
object is subject to the person’s direction.
6.4 Menu Operation Description
6.4.1 Power on Display
Ver 120: The cutter program version is 120
The default value: Speed V=400mm, Knife Force f=200g.
6.4.2 Online/Offline Operation
When the cutter switch on the first time, it will initialize and then the cutter will be in Online
status. Press “ONLINE’ can switch it into Online/Offline status. When cutter transmits data to
computer, the cutter must be Online. While it needs to set cutter’s parameters and manual
operation, it must be Offline. The LCD shows as followings:
To Next Page
Loading...