To Next PageTo Next PageWhy is my Follett 12 not dispensing ice?
If your Follett Water Dispenser isn't dispensing ice, there could be several reasons. First, the power switch might be off or faulty; check the switch, turn it on, or replace it. Second, the dispense switch may be faulty and need replacement. Third, there could be a wheel motor malfunction; check the motor and capacitor and replace them if necessary.
Why does the ice machine run continuously on my Follett 12?
If the ice machine in your Follett Water Dispenser runs continuously, it might be due to a faulty or incorrectly positioned bin stat. Check for proper positioning. If the stat does not open when ice is placed on the capillary tube, replace the stat.
What to do if my Follett 12 does not dispense water?
If your Follett Water Dispenser isn't dispensing water, there are a few potential causes. First, the water solenoid valve may be faulty and needs replacement. Second, the dispense switch could be faulty and require replacement. Finally, the power switch might be off or faulty; check the switch, turn it on, or replace it if necessary.
What to do if the dispense wheel rotates continuously on my Follett 12?
If the dispense wheel on your Follett Water Dispenser rotates continuously, it's likely that the dispense switch contacts are burned out. You'll need to replace the dispense switch.
Details on electrical power requirements and connections for the dispensers.
Environmental conditions like air and water temperature affecting performance.
Specifications for water inlet and drain connections.
Required space around the unit for proper air circulation and cooling.
Preparation steps and general installation guidelines before starting the process.
Step-by-step guide for installing countertop models without the leg accessory.
Instructions for installing countertop dispensers that use the leg accessory.
Procedures for mounting the dispenser unit on a wall.
Diagrams and measurements for wall mounting the dispenser unit.
Visual representation of the dispenser's side profile for wall mounting.
Steps to attach the bottom panel for wall-mounted dispensers.
Diagram showing the bottom view of the wall-mounted dispenser.
Layout of the wall mount bracket and utility connections.
Explanation of the dispenser's operational mechanism and process.
Description of the SensorSAFE accessory's functionality and benefits.
Recommended schedule for cleaning and sanitizing the ice machine and dispenser.
Specific cleaning tasks to be performed on a weekly basis.
Specific cleaning tasks to be performed on a monthly basis.
Procedures for semi-annual cleaning, descaling, and sanitizing.
Detailed steps for cleaning and descaling the ice machine.
Detailed steps for sanitizing the ice machine.
Steps for cleaning and descaling the ice dispenser components.
Steps for sanitizing the ice dispenser components.
Essential information and system overview before performing service.
Detailed explanation of how the ice machine produces ice.
Instructions for accessing the electrical box and control board for service.
General| Brand | Follett |
|---|---|
| Model | 12 |
| Category | Water Dispenser |
| Language | English |
