Reversing the door swing – optional
1. Remove screws and latch from refrigerator cabinet. (Fig. 3.1).
2. Use flat screwdriver to carefully remove (do not scratch) hinge
covers (Fig. 4.1).
3. Support door and remove screws attaching hinge to refrigerator
cabinet (Fig. 4.2).
4. Cover hinge screw holes with screw hole plugs removed from
opposite side.
5. Reverse door and reinstall hinge screws.
6. Reinstall latch on opposite side.
7. Remove screws and handle from door (Fig. 5.1).
8. Rotate handle (Fig. 5.2).
9. Reinstall handle screws (application of 242 blue Loctite
®
to
handle screws recommended).
4
1
2
1
1
2
1
Fig. 3
Fig. 4
Fig. 5
Loctite is a registered trademark of Henkel Corporation in the United States and other countries.
To Next Page
Loading...
