5.6.3 AHD2 Mirror
The AHD2 image can be set Mirrored with this function.
Fox example, if you install the AHD2 camera on the front of your
vehicle, you can mirror it to get the correct image.
5.6.4 Date Format
There are 4 styles to choose from: None, YYYY MM DD, MM DD
YYYY, DD MM YYYY.
5.6.5 Stamp
There are 4 styles to choose from: Date+Logo, Date, Logo, Off.
5.6.6 LCD Power Save
There are 3 options for choose from: Off, 1 min, 3 min.
If you set the 1 min or 3 min, then the monitor will turn off after 1
min or 3 min if there is no operation.
5.6.7 Reset Setup
Please be careful when you use this feature, it will reset your system.
5.6.8 FW Version
The version information of this system.
5.6.9 Contrast, LCD Brightness, Saturation
You can adjust the screen images’ parameters by these options.
Press “SEL” button to enter the parameter you want to adjust, press
“UP+” / “DOWN-” buttons to increase or discrease, and then press
“SEL” button to confirm and back to previous panel.
5.6.10 ColorTemp
You can choose the screen color temperature according to your own
habits: Off, Warm Color, Cool Color. It is “Off” by default.
5.6.10 VCOM DC
It can change the brightness of the screen. It is “80” by default.
And we don’t recommend you to change this parameter.
To Next Page
Loading...