Fora Diamond Mini - Meter Setup: Date Setting; Setting the Date

6
FORA Diamond MINI TEST STRIPS
SETTING THE METER AND DELETING
THE MEMORY
Your system measures the amount of sugar (glucose) in whole
blood. Blood is applied to the absorbent hole on the test strip and is
automatically drawn into the reaction cell where the reaction takes place.
Start with the meter off (no test strip inserted). Press SET.
Absorbent Hole
Apply a drop of blood here.
The blood will be automatically absorbed.
Confirmation Window
This is where you confirm if enough
blood has been applied to the absorbent
hole in the strip
Test Strip Handle
Hold this part to insert the test strip into the slot.
Contact Bars
Insert this end of the test strip into the meter.
Push it in firmly until it will go no further.
1. Setting the date
With the year flashing, press Main button
until the correct year appears. Press SET.
With the month flashing, press Main
button until the correct month appears.
Press SET.
With the day flashing, press Main button
until the correct day appears. Press SET.