11
Entering the Setting Mode
Start with the meter off (no test strip
inserted). Press SET.
1. Setting the date
With the year flashing, press Main button
until the correct year appears. Press SET.
With the month flashing, press Main
button until the correct month appears.
Press SET.
With the day flashing, press Main button
until the correct day appears. Press SET.
2. Setting the time format
Press Main button to select the desired
time format --- 12h or 24h. Press SET.
Setting the Meter
Before using your meter for the first time or if you change the meter
battery, you should check and update these settings. Make sure you
complete the steps below and have your desired settings saved.
To Next Page
Loading...
