21
2. Select the appropriate measuring mode by pressing Main button
For selecting the measurement mode, please refer to the “FOUR
MEASURING MODES”.
1. Insert the test strip to turn on the
meter
Wait for the meter to display “
” and
“
”.
Performing a Blood Glucose Test
You will need:
Test Strip
2
Lancing Device
3
Lancet
4
Meter
1
3. Obtaining a blood sample
Use the pre-set lancing device to
puncture the desired site. Wipe off the
first appeared drop of blood with a clean
cotton swab. The size of the drop should
be at least as big as
(actual size), which
is 0.5 microliter (
μ
L) of volume. Gently
squeeze the punctured area to obtain
another drop of blood. Be careful NOT to
smear the blood sample.
To Next Page
Loading...
