22
NOTE:
• Do not press the punctured site against the test strip or try to smear the blood.
• If you do not apply a blood sample to the test strip within 3 minutes, the meter
will automatically turn off. You must remove and reinsert the test strip to start
a new test.
• The confirmation window should be filled with blood before the meter begins
to count down. NEVER try to add more blood to the test stri
p after the drop of
blood has moved away. Discard the used test strip and retest with a new
one.
• If you have trouble filling the confirmation window, please contact your health
care professional or the local customer service for assistance.
4. Apply the sample
Gently apply the drop of blood to the
absorbent hole of the test strip at a titled
angle. Confirmation window should be
completely filled if enough blood sample
has been applied. Do NOT remove your
finger unti
l you hear a beep sound.
To Next Page
Loading...
