25
Reviewing Blood Glucose Day Average Results
1. Press and release Main button.
When “
” appears on the display,
keep pressing Main button for 3 seconds
until the flashing “
” appears.
Release Main button and then your 7-day
average result measured in general mode
will appear on the display.
(100 mg/dL = 5.6 mmol/L)
2. Press Main button to review 14-, 21-, 28-, 60- and 90- day average
results stored in each measuring mode in the order of Gen, AC, then PC.
3. Exit the meter memory. Keep pressing the Main button and the meter
will turn off after displaying the last test result.
NOTE:
• Any time you wish to exit the memory, keep pressing Main button for 5
seconds or leave it without any action for 3 minutes. The meter will switch off
automatically.
• Control solution results are NOT included in the day average.
• If using the meter for the first time, “---” displays when you recall the test
results or review the average result. It indicates that there is no test result in
the memory.
To Next Page
Loading...
