16
2. Press Main button to mark this test
as a control solution test
With “
” displayed, the meter will not
store your test result in memory. If you
press the Main button three times, the
“
” will disappear and this test is no
longer a control solution test.
WARNING:
When doing the control solution test, you have to mark it so that the test result
will NOT mix with the blood glucose TEST RESULTS stored in the memory. Failure
to do so will mix up the blood glucose test results with the control solution test
results in memory.
1. Insert the test strip to turn on the
meter
Insert the test strip into the meter. Wait
for the meter to display “
” and “
”.
To Next Page
Loading...
