32
Step 5
Read your result.
The result of your blood glucose test will appear af-
ter the meter counts down to 0. This blood glucose
result will automatically be stored in the memory.
Step 6
Eject the used test strip and remove the lancet.
To eject the test strip, point the strip at a disposal
container for sharp items. The meter will switch
itself off automatically after the test strip is ejected.
Step 7
Always follow the instructions in the lancing device insert when
removing the lancet.
WARNING!
The used lancet and test strip may be biohazards. Please discard them
carefully according to the recommendations of your healthcare provider.
To Next Page
Loading...
