BLIND SPOT INFORMATION
SYSTEM INDICATORS
When blind spot information
system detects a vehicle, an
alert indicator illuminates in the
exterior mirror on the side from which the
vehicle is approaching. If you turn the turn
signal on for that side of your vehicle, the
alert indicator flashes.
BLIND SPOT INFORMATION SYSTEM – TROUBLESHOOTING
BLIND SPOT INFORMATION SYSTEM – INFORMATION MESSAGES
ActionMessage
A fault with the system has occurred. Have
your vehicle checked as soon as possible.
Blind Spot System Fault
Something is blocking the sensors. Clean
the sensors.
Blind Spot Not Available Sensor Blocked
See Manual
The system automatically turns off and
displays this message when you connect a
trailer to your vehicle under any of the
following conditions:
- Your vehicle does not have blind spot
information system with trailer coverage.
- You switch the blind spot information
system off through the touchscreen.
- Your trailer exceeds the limits for the
system. See Setting a Trailer Length
(page 297). Only appears if your vehicle has
blind spot information system with trailer
coverage.
Blind Spot Alert Deactivated Trailer
Attached
298
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Blind Spot Information System
To Next Page
Loading...
