EasyManua.ls Logo

Ford EXPLORER 2024 - Keyless Entry; What Is Keyless Entry; Keyless Entry Limitations; Keyless Entry Settings

Ford EXPLORER 2024
557 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WHAT IS KEYLESS ENTRY
The system allows you to lock and unlock
your vehicle without taking the passive key
out of your pocket or purse.
KEYLESS ENTRY LIMITATIONS
Make sure your remote control is within 3 ft
(1 m) from the front door handles and the
liftgate.
The system could not function if:
The remote control remains stationary
for about a minute.
The vehicle battery has no charge.
The remote control battery has no
charge.
There is interference causing issues
with the remote control frequencies.
The remote control is too close to
metal objects or electronic devices, for
example keys or a cell phone.
KEYLESS ENTRY SETTINGS
Reprogramming the Unlocking
Function (If Equipped)
You can enable the two-stage unlocking
function allowing you to unlock only the
driver door when you touch the unlock
sensor.
Press and hold both the lock and unlock
buttons on the remote control for four
seconds to disable or enable two-stage
unlocking.
If you program the unlocking function so
that only the driver door unlocks, you can
unlock all of the other doors from inside
your vehicle using the power door lock
control. You can unlock individual doors
by pulling the interior door handles on
those doors.
Key Detection Alert
Displays a message in the instrument
cluster if no valid key is detected, when you
exit your vehicle with a key, after the last
front door is closed and your keyless
vehicle is in run, indicating your vehicle is
still on. An audible alert sounds if you have
driven the vehicle and reached a speed of
16 mph (25 km/h) and the above
mentioned conditions are met.
You can switch the audible alert on or off.
1. From the settings menu, press Vehicle.
See Center Display (page 457).
2. Switch Key Detection Alert On or Off.
USING KEYLESS ENTRY
Unlocking the Doors
E248553
With your passive key within 3 ft (1 m) of
your vehicle, touch the unlock sensor on
the back of the door handle for a brief
period and then pull on the door handle to
unlock, being careful not to touch the lock
sensor at the same time or pull on the door
handle too quickly. The intelligent access
system requires a brief delay to
authenticate your intelligent access key.
83
Explorer (CTW) Canada/Mexico/United States of America, enUSA, Edition date: 202401, DOM
Keyless Entry

Table of Contents

Related product manuals