AppLink issues
Possible solution(s)Possible cause(s)Issue
On an iPhone with iOS7+, to
force close an app, double
tap the home button then
swipe up on the app to
close it. Tap the home
button again, then select the
app again to restart it. After
a few seconds, the app
should then appear in SYNC
3's Mobile App's Menu.
Switch Bluetooth off and
then on to reset it on your
phone. If you are in your
vehicle, SYNC 3 should be
able to automatically re-
connect to your phone if
you press the "Phone"
button.
There is a Bluetooth issue
on some older versions of
the Android operating
system that may cause apps
that were found on your
previous vehicle drive to not
be found again if you did
not switch Bluetooth off.
My Android phone is
connected, my app(s) are
running, I restarted them,
but I still cannot find any
apps.
108
MKC (TME) , enUSA, Edition date: 01/2016, Second Printing
SYNC™ 3
To Next Page
Loading...
