Manual - Formech 300XQ
15
Optional Extras
1. Service kit 2. Reducing windows 3. Blow mould windows
4. 300XQ Machine trolley
The following items can be purchased for your 300XQ vacuum forming machine:
1. It is unlikely that you will need to service or repair your machine for many years provided you follow
the maintenance information contained in this manual; however the table and clamp seals, which are
considered to be consumable items, will need to be replaced depending on the usage of the machine.
Therefore this kit contains the essential consumables (seals and pump fi lter) to ensure a good performance
of your machine year on year.
2. Formech has available a standard size of reducing windows. This reducing window has an aperture of
228mm x 203mm, to use plastic size of 248mm x 223mm. Formech can also produce special size reducing
windows. For more information please contact our sales department.
3. You can use your vacuum forming machine to do blow moulding by fi tting a special circular reducing
window to your machine. The maximum diameter you will get on the 300XQ is 270mm. For more
information please contact our sales department.
4. The Formech machine trolley allows you to easily move your 300XQ machine. The 2 locking castors
assure the trolley remains in position all the time. Underneath there is also space to store plastic material
and moulds.
To Next Page
Loading...
