Manual - Formech 300XQ
6
Introduction and initial assembly
Your Formech machine is supplide with:
1x Electrical cable
1x Installation/Operations/Repair
Manual
1x EC Certifi cate of Conformity
1x Table Mesh
ENSURE THAT THE TABLE LEVER IS TIGHTLY SCREWED INTO THE CRANK MECHANISM ON THE
RIGHT HANDSIDE OF THE MACHINE. IF OPERATED WITH THE LEVER LOOSENED YOU MAY
DAMAGE THE CRANK OR THE HANDLE.
EC Machinery Directive
2006/42/EC
Declaration of Conformity
We hereby certify that the machinery stipulated below complies with all the relevant provisions
of the EC Lachinery Directive and the National Laws and regulations adopting this Directive
Modifi ctions to this machinery without prior approval from the undersigned will render this
declaration null and void.
Machine description: Vacuum Forming Machine
Machine Function: Thermoforming of Plastic Sheet
Model/Type: Compac Mini
Serial Number:
Date of Manufacture:
Is in conformity with the provisions of the following other EC Directives:
2004 / 108/EC - EMC
2006 / 95/EC - LVD
Technical File Compiled by: Andrew Berry at address below
Signifi cant harmonised standards applied:
EN ISO 12100 : 2010
EN ISO 13849 : 2006
EN 60204 - 1 : 2006
EN 12409: 2008
Signed:
Date:
Name: Paul Vukovich
Position: Managing Director
Being the responsible person appointed by the manufacturer
66
.
.
.
Installation, Operating and Service Manual
Desktop Vacuum
Forming Machine
For Parts, Service & Technical Assistance
Telephone: +44 (0) 1582 496797
Fax: +44 (0) 1582 496646
300XQ
To Next Page
Loading...
