48
8 Disassembly and repair
All steps that involve opening the machine and/or investigating internal components
should be done by skilled persons under the guidance of Formlabs Support or a
certified service provider.
Contact Formlabs Support or a certified service provider to receive repair instructions and
authorization, including how to disassemble or remove the shells.
Task Frequency
Replacing the slider When the slider is damaged and does not move
smoothly or after 300,000 layers.
Replacing the Light Processing Units (LPUs) When advised by Formlabs Support or a certified
service provider.
Replacing the display assembly When the display becomes inoperable or does
not respond to touch inputs.
WARNING
To Next Page
Loading...
