How to fix Formlabs Form Cure 3D Printers display that does not turn on?
If the display does not turn on, check that the power supply indicator light is illuminated. You may also try another outlet and disconnect and reconnect the power.
How to fix Formlabs Form Cure 3D Printers display that does not turn off?
If the display does not turn off or sleep, disconnect and reconnect the power and update the firmware.
What to do if Formlabs Form Cure 3D Printers display indicates that the cover is open when the cover is closed?
If the display indicates that the cover is open when the cover is closed, wiggle the cover from side to side and check that the interlock magnets are installed in the bottom edge of the cover.
Essential safety and usage instructions for user reference.
How to access the latest documentation, support, and technical info.
Explains the purpose of the Form Cure in post-curing 3D printed parts.
Lists the detailed technical data, dimensions, and requirements of the Form Cure.
Identifies and describes the key physical components of the Form Cure unit.
Details how to operate the Form Cure using the knob and display interface.
Covers safety related to electronic components, hot surfaces, and environmental factors.
Outlines necessary protective gear and precautions when handling resin.
Lists recommended tools and accessories for use with the Form Cure.
Guidelines for selecting and preparing a suitable installation location for the Form Cure.
Step-by-step instructions for safely unpacking the Form Cure and its accessories.
Procedures for physically setting up and connecting the Form Cure unit.
Instructions for preparing and packaging the Form Cure for shipping or storage.
Specifies the recommended environmental conditions for operating the Form Cure.
Details the steps for inserting parts, setting parameters, and managing the post-curing cycle.
Advice on adjusting post-curing for parts with complex or large/thin features.
Recommended cure times and temperatures for various Formlabs resins.
Instructions for powering off the device and accessing system information.
Guidance on handling unexpected events, spills, and emergencies.
Tasks for inspecting the Form Cure before, monthly, and every three months.
Specific checks, like turntable maintenance, to perform between curing operations.
Detailed monthly checks for interior surfaces and light diffusers.
Procedures for inspecting the cover and display for cleanliness and function.
Overview of scheduled maintenance tasks like firmware updates.
Steps to resolve display freezing issues by power cycling the unit.
Identifies common errors, their causes, and solutions for the Form Cure.
Guidance and required tools for performing disassembly and repair tasks.
Procedures for the proper disposal of the device and its packaging.
General| UV Wavelength | 405 nm |
|---|---|
| Type | Post-Processing Unit |
| Compatible Resins | Formlabs Resins |
| Curing Method | UV Light |
| Temperature Range | Up to 80°C (176°F) |
| Light Source | 405 nm LED |
| Power Supply | 100-240 V |
| Build Volume | 145 x 145 x 175 mm (5.7 x 5.7 x 6.9 in) |
To Next Page
