Need help?Do you have a question about the Formlabs Form 3 and is the answer not in the manual?
Understand manual and safety instructions before use to prevent injury or death.
Access latest documentation, contact support, and find warranty details.
Defines the Form 3's commercial use in additive manufacturing and its limitations.
Lists detailed specifications for printer components, including dimensions, power, and connectivity.
Identifies key printer components and explains the function of the touchscreen display.
Details laser hazards, precautions, and interlock system for safe operation.
Covers safe handling of resin, isopropyl alcohol (IPA), and sharp tools, including warnings.
Specifies required PPE like gloves and eye protection for handling resin and during maintenance.
Guide to unboxing the Form 3 and preparing a stable, level workspace.
Covers connecting cables, leveling, installing tank, build platform, and resin cartridge.
Details connecting the printer via USB, Ethernet, and Wi-Fi for data transfer and monitoring.
Covers PreForm software, pre-print checks, and starting or stopping print jobs.
Details steps for washing, drying, and post-curing finished 3D prints.
Managing via Dashboard, changing resin types, fine-tuning, and powering off the printer.
Covers inspections before prints, monthly, and quarterly for key printer components.
Details cleaning ID chips, resin tank, and lubricating axes for optimal printer performance.
Includes firmware updates, resin tank maintenance, resin filtering, and cartridge replacement.
Covers collecting diagnostic logs, factory reset, and cleaning after failed prints.
Addresses common print setup and failure issues with specific error causes and solutions.
Outlines guidance for disassembly, component replacement, and repair procedures.
Guidelines for responsibly disposing of liquid resin, IPA, and solvents.
Covers disposal of electronic components and packaging materials.
General| Technology | Low Force Stereolithography (LFS) |
|---|---|
| Laser Power | 250 mW |
| Laser Spot Size | 85 microns |
| Weight | 17.5 kg (38.5 lbs) |
| Software | PreForm |
| XY Resolution | 25 microns |
| Build Volume | 145 x 145 x 185 mm |
| Layer Thickness | 25 - 300 microns |
| Connectivity | Ethernet, Wi-Fi, USB |
| Printer Dimensions | 405 x 375 x 530 mm |
| Materials | Formlabs Resin |
| Power Requirements | 100–240 V, 2.5 A, 50/60 Hz, 220 W |
| Operating System Compatibility | Windows 7 (64-bit) and higher, macOS 10.12 and higher |
To Next Page
