22
5.5 Emergency and Exceptional Situations
Formlabs has made every eort to provide updated Safety Data Sheets (SDS) for every resin
product, in accordance with the latest government guidelines. Always consult the SDS as
the primary source of information to understand safety and handling of Formlabs materials.
In an emergency involving resin, always refer to the Safety Data Sheet (SDS) and/or
seek help from a medical professional.
When handling IPA, always consult the safety Data Sheet (SDS) from the IPA supplier as the
primary source of information. Handle IPA with gloves in a well-ventilated area. Keep away
from heat, sparks, and open flame. IPA evaporates rapidly, so keep the rinse tub and bottles
closed whenever possible.
Promptly clean and inspect the printer after a resin spill to minimize any cosmetic or functional
damage to the printer. If you have experienced an accidental resin spill, document the problem
with photos and clean the printer as best as possible. Contact Formlabs or a certified service
provider as soon as possible.
WARNING
To Next Page
Loading...
