12
3.1.2 Sharp Tools
1
2
3
4
The accessories include sharp tools such as: a part removal tool , flush cutters ,
a scraper , and tweezers .
Cutting hazard. Using these tools on slippery surfaces (such as a resin-coated build
platform) can result in sudden movement. Orient sharp tools away from yourself,
especially when cutting or scraping.
3.1.3 Resin
Respect Formlabs resin like any household chemical. Follow standard chemical safety
procedures andFormlabs resin handling instructions.
In general, Formlabs resin is not approved for use with food, drink, or medical applications on
the human body. However, biocompatible resins, such as Dental SG Resin, are biologically safe
for specific types and lengths of exposure to the human body. Refer to information about each
specific resin for more detail.
Never ingest resin in liquid or solid form.If swallowed, immediately call a poison
center or medical professional.
Always consult theSafety Data Sheet (SDS) as the primary source of information to
understand safety and handling of Formlabs materials.
3.1.4 Radio Interference
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to CFR Title 47, Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference, in which case the user will be required to correct
the interference at their own expense.
Changes or modifications to this product not authorized by Formlabs could void the
electromagnetic compatibility (EMC) and wireless compliance and negate your authority
to operate the product.
CAUTION
WARNING
NOTICE
1
3 4
2
To Next Page
Loading...
