7-4
FORMULA
FASTECH
FASTECH
NOTICE
If any problems are encountered during the
outing, have your boat inspected by your
Formula dealer and request any necessary
repairs before your next outing.
Stopping Diesel Engines
Do not use the ignition safety switch and
lanyard for normal stopping of the
engines. Doing so will impair your ability
to restart the engines quickly or may
create a hazardous swamping condition.
1. Slowly bring the throttle lever(s) to the IDLE
position.
2. Move the shift lever(s) to NEUTRAL.
3. Move the throttle lever(s) forward until engine
speed is approximately 1400 RPM. Refer to
propulsion unit operator’s manual for cool
down procedure.
4. After cooling the engines, move the throttle
lever(s) back to the IDLE position.
5. Turn the ignition keys to OFF position.
NOTICE
If any problems are encountered during the
outing, have your boat inspected by your
Formula dealer and request any necessary
repairs before your next outing.
ENGINE FLUSHING
If your engines are not equipped with a close-
water cooling system, fresh water flush your
engines after each use in salty, polluted or
brackish water. Flushing your engines will
minimize the formation of deposits that can clog
cooling passages.
Formula offers a fresh water flushing system on
engines that do not have a closed-water cooling
system. The optional flushing port is located on
the front starboard side of the engine.
To Next Page
Loading...
