Forney 00317 User Manual

PLASMA CUTTER
OWNER’S MANUAL
WITH BUILT-IN AIR COMPRESSOR
• Uses electrical arc and compressed air to cut
steel, aluminum and other conductive metals.
• Drag torch technology allows you to move
(drag) torch directly across the metal surface for
more precise cuts.
• Cuts up to 1/8” mild steel and severs up to
1/4” steel.
• Uses standard household 120 VAC current.
• Built-in piston driven compressor and
lightweight inverter power supply.
• Thermal overload protection
• Three diagnostic LED lights (power,
temperature, and torch energized/ready
to work).
• Post-Flow air cooling.

Forney 00317 Specifications

General

Brand	Forney
Model	00317
Category	Welding System
Language	English

Summary

Limited Warranty

Notification and Contact

How to contact Forney for warranty questions or visit their website for details.

Warranty Duration

Details the warranty periods for different plasma cutter components.

Warranty Exclusions

Lists conditions and parts not covered by the limited warranty.

Warranty Claim Process

Outlines the steps for initiating and processing a warranty claim.

Safety Rules and General Warnings

Introduction to Plasma Cutting Safety

Sets the stage for safety rules and unit safeguards.

Electrical Safety Precautions

Essential guidelines for safe electrical connections and operation.

Eye and Body Protection Guidelines

Fumes, Gases, and Fire Prevention

Noise, Burns, and EMC Precautions

General Information

Plasma Arc Cutting Principles

Explains the fundamental science behind plasma arc cutting technology.

Setup and Connections

Location and Power Supply Connection

Guides on unit placement, power connection, and circuit requirements.

Extension Cords, Generators, and Grounding

Recommendations for using extension cords, generators, and proper ground connections.

Torch Connection Procedure

Instructions and warnings for correctly attaching the plasma torch.

Functions and Controls

Control Panel Features

Details the ON/OFF switch and the operational indicators of the Green, Yellow, and Red LEDs.

Cutting Operation Preliminaries

Torch Assembly and Input Power Check

Ensures correct torch assembly and verifies input power and ground connections.

Automatic Air Purge and Quality Check

Explains the air purge system and how to verify air quality.

Cutting Techniques

Pilot Arc and Arc Transfer

Guides on starting the pilot arc and transferring it for cutting.

Hand Torch Cutting Methods

Covers edge start, piercing, drag cutting, and standoff cutting.

Torch Consumable Parts

Selecting and Replacing Consumables

Details the procedure for changing torch consumables like electrode, tip, and shield cup.

Torch Body, Handle, and Cable Care

Advises on inspecting and caring for the torch body, handle, and cable for safety.

Operating Faults and Maintenance

Troubleshooting Common Cutting Faults

Lists common cutting faults and their potential causes and solutions.

Unit Cleaning and Inspection

Provides guidelines for maintaining the cleanliness and functionality of the main unit.

Torch Maintenance and Care

Torch Component Wear and Replacement

Details inspection and replacement of shield cup, tip, air distribution ring, and electrode.

Torch Body, Handle, and Cable Precautions

Emphasizes safe handling and care for the torch body, handle, and cable.

Troubleshooting Guide

LED Status and Airflow Diagnostics

Helps diagnose problems related to LED indicators, fan, and airflow.

Arc Ignition and Power Supply Issues

Addresses issues with pilot arc formation, cutting, and power supply faults.

Unit Parts Information

Unit Parts List

A comprehensive list of part numbers for the plasma cutter unit.

Unit Parts Breakdown Diagram

Visual representation of unit components and their locations.

Unit Wiring Diagram

Torch Parts Information

Torch Parts List

A list of part numbers for the plasma torch and its consumables.

Torch Parts Breakdown Diagram

Visual representation of torch components and their assembly.

Manufacturer Contact Information