Configuration Overview Page 11 FortiFone User Guide
To configure the SNTP settings via phone user interface:
1. Tap Menu > Settings > Basic Settings > Time & Date > SNTP Settings.
2. Tap the or softkey to select the time zone that applies to your area from the Time
Zone field.
3. The default time zone is +8.
4. Enter the domain name or IP address in the NTP Server1 and NTP Server2 field
respectively.
5. Tap the or softkey to select the desired value from the Daylight Saving field.
6. Tap the or softkey to select the desired time zone name from the Location field.
This field appears only if Daylight Saving field is selected Automatic.
7. Tap the Save softkey to accept the change or the Back softkey to cancel.
To configure the time and date manually via phone user interface:
1. Press Menu > Settings > Basic Settings > Time & Date > Manual Settings.
2. Enter the specific time and date.
3. Tap the Save softkey to accept the change.
4. The date and time displayed on the LCD screen will change accordingly.
To configure the time and date format via phone user interface:
1. Tap Menu > Settings > Basic Settings > Time & Date > Time & Date Format.
2. Tap the or softkey to select the desired time format (12 Hour or 24 Hour) from the Time
Format field.
3. Tap the or softkey to select the desired date format from the Date Format field.
4. Tap the Save softkey to accept the change or the Back softkey to cancel.
There are 7 available date formats. For example, for the date format WWW DD MMM, WWW
represents the abbreviation of the weekday, DD represents the two-digit day, and MMM
represents the first three letters of the month.
These are the date formats available:
Date Format Example (2015-03-18)
WWW-MMM-DD Wed Mar 18
DD-MMM-YY 18-Mar-15
YYYY-MM-DD 2015-03-18
DD/MM/YYYY 18/03/2015
MM/DD/YY 03/18/15
DD MMM YYYY 18 Mar 2015
WWW DD MMM Wed 18 Mar
To Next Page
Loading...
