Configuration Overview Page 14 FortiFone User Guide
To activate the phone lock via phone user interface:
1. Tap Menu > Settings > Advanced Settings (Default password: 23646) > Phone Lock.
2. Tap the or softkey to select Enabled from the Lock Enable field.
3. Tap the or softkey to select the desired type from the Lock Type field.
4. (Optional) Enter the desired interval of automatic phone lock in the Lock Time Out field. The
default timeout is 0. It means the phone will not be automatically locked. You need to long
press the ? key to lock it immediately when the phone is idle. If it is set to other values
except 0 (e.g. 5), the phone will be locked when the phone is inactive in idle screen for the
designated time (in seconds).
5. Tap the Save softkey to accept the change.
When the phone is locked, the LCD screen prompts Phone locked and displays the icon.
To unlock the phone, you must know the phone unlock PIN. The default phone unlock PIN is 123.
To change the phone unlock PIN via phone user interface:
1. Tap Menu > Settings > Basic Settings > Change PIN.
2. Enter the desired value in the Old PIN, New PIN and Confirm PIN fields respectively.
3. Tap the Save softkey to accept the setting or the Back softkey to cancel.
To unlock the phone via phone user interface:
1. Tap any locked key, the LCD screen prompts Please Enter PIN.
2. Enter the PIN in the Unlock PIN field.
3. Tap the OK softkey to unlock the keypad. The icon disappears from the LCD screen.
You can long tap ? or wait for a period of time (if configured) to lock the keypad again.
Program emergency numbers on the phone so that they can be dialed when the phone is locked.
To specify emergency numbers via web user interface:
1. Click on Features > Phone Lock.
2. Enter the emergency number in the Emergency field. For multiple emergency numbers,
enter a comma between every two numbers. The default emergency numbers are 112, 911,
110.
3. Click on Confirm to accept the change.
The unlock PIN length must be within 15 digits.
You can also unlock the keypad by entering the administrator password. When you enter the
administrator password to unlock the keypad, the phone will turn to the Change PIN screen.
Emergency number is configurable via web user interface only.
To Next Page
Loading...
