Fortinet Fortigate 100D User Manual

Configure the firewall policy using the using the CLI:
Enter the following commands in the CLI:
cong rewall policy
edit 1
set srcintf “internal”
set dstintf “wan1”
set srcaddr “all”
set dstaddr “all”
set action accept
set schedule “always”
set service “ANY”
set nat enable
next
edit 2
set srcintf “internal”
set dstintf “4g”
set srcaddr “all”
set dstaddr “all”
set action accept
set schedule “always”
set service “ANY”
set nat enable
next
edit 3
set srcintf “internal”
set dstintf “modem”
set srcaddr “all”
set dstaddr “all”
set action accept
set schedule “always”
set service “ANY”
set nat enable
next
end

Fortinet Fortigate 100D Specifications

General

Brand	Fortinet
Model	Fortigate 100D
Category	Firewall
Language	English