Fortinet FortiGate FortiGate-3000 Installation Guide

18 01-28005-0026-20041101 Fortinet Inc.
Factory default FortiGate configuration settings Getting started
Factory default NAT/Route mode network configuration
When the FortiGate unit is first powered on, it is running in NAT/Route mode and has
the basic network configuration listed in Table 2. This configuration allows you to
connect to the FortiGate unit web-based manager and establish the configuration
required to connect the FortiGate unit to the network. In Ta b l e 2 , HTTPS
administrative access means you can connect to the web-based manager using
HTTPS protocol through this interface. Ping administrative access means this
interface responds to ping requests.
Table 2: Factory default NAT/Route mode network configuration
Administrator
account
User name: admin
Password: (none)
Internal interface
IP: 192.168.1.99
Netmask: 255.255.255.0
Administrative Access: HTTPS, Ping
External Interface
IP: 192.168.100.99
Netmask: 255.255.255.0
Administrative Access: Ping
Port 1
IP: 0.0.0.0
Netmask: 0.0.0.0
Administrative Access: Ping
Port 2
IP: 0.0.0.0
Netmask: 0.0.0.0
Administrative Access: Ping
Port 3
IP: 0.0.0.0
Netmask: 0.0.0.0
Administrative Access: Ping
Port 4/HA
IP: 0.0.0.0
Netmask: 0.0.0.0
Administrative Access: Ping
Network Settings
Default Gateway (for default route) 192.168.100.1
Interface connected to external network
(for default route)
external
Default Route
A default route consists of a default gateway and the name of
the interface connected to the external network (usually the
Internet). The default gateway directs all non-local traffic to this
interface and to the external network.
Primary DNS Server 207.192.200.1
Secondary DNS Server 207.192.200.129

Fortinet FortiGate FortiGate-3000 Specifications

General

Brand	Fortinet
Model	FortiGate FortiGate-3000
Category	Firewall
Language	English