Foscam FI8905W - Alarm Service Settings

W
W
w
w
ww.foscam.
ww.foscam.
us
us
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
49
7) Error in PORT mode. PASV mode should be selected if the device is behind a NAT.
8) Cannot upload file. Verify your account is authorized
If an error occurs check the parameters you entered are correct. The filename format of the
image is similar to 00606E8C1930(sarah)_0_20100728114350_25.jpg
Check if your FTP server supports this file name format.
3.14 Alarm Service Settings
IP Camera supports Motion Detection Alarmed, when the motion has been detected, it will
send email alerts or upload images or record.
Figure 3.39
1---- If you want to set Motion Detection Alarmed ,select the checkbox
2---- The larger the number, the higher the motion sensitivity will be
3---- Select this option to reduce false alarms when light changes
If motion is detected after you enable Motion Detection Armed, the Alarm Status will turn to
Motion Detect Alarm.
1
2
3