2 Access the IP Camera
This chapter explains how to access the camera through browser and RTSP player.
2.1 Access the Camera in LAN
This camera supports HTTP and HTTPS protocols, you can access the camera by two ways.
(1) http:// LAN IP + HTTP Port NO.
Double click the Equipment Search Tool icon and it should find the camera's IP address automatically after you
plug in the network cable.
Double click the IP address of the camera; your default browser will open to the camera login page.
(2) https:// LAN IP + HTTPS Port NO.
The default Https port NO. is 443. You can use the url to access the camera: https:// LAN IP + HTTPS port.
Go to 4.3.5 Port Settings > Network > Port panel, you can see and change the https and https port NO.
2.2 Access the Camera in WAN
2.2.1 Static IP Addresses
Users with static IP addresses after you have finished connecting the camera using the LAN IP address
and port forwarding, you can access the camera directly from Internet using the WAN IP address and
port number.
How to Obtain the WAN IP address from a public website ?
To obtain your WAN IP address, enter the following URL in your browser: http://www.whatismyip.com.The
To Next Page
Loading...
