Foscam FI9961EP - Poe (Power over Ethernet); Read before Use; Packing Contents

3
1.2 PoE (Power over Ethernet)
The Network Camera is PoE-compliant, allowing transmission of power and data via a single Ethernet cable.
Such as the following picture: connect the Network Camera to a PoE-enabled router / switch via Ethernet
cable.
1.3 Read before Use
Please first verify that all contents received are complete according to the Package Contents listed below.
Before the Network Camera is installed, please carefully read and follow the instructions in the Quick Setup
Guide to avoid damage due to faulty assembly and installation. This also ensures the product is used properly
as intended.
1.4 Packing Contents
IP Camera
Power Adapter
Expansion Screws Package
Hexagon Screwdriver
Quick Setup Guide
Warranty Card