Foscam FI9961EP - Default Parameters; Specification

69
6.1.10 Camera is added by others
When use myfoscam.com cloud or Foscam app, one camera can only be added to one account at the same
time. To solve error “This camera has already been added by another account” when add camera to Foscam
app or cloud, please send a clear photo of camera’s model sticker to Foscam support email
support@foscam.com to unbind it.
More FAQs are available here:
https://www.foscam.com/faqs/index.html
6.2 Default Parameters
Default network parameters
IP address: obtain dynamically
Subnet mask: obtain dynamically
Gateway: obtain dynamically
DDNS: Embedded FOSCAM DDNS Service
Username and password
Default admin username: admin with a blank password
6.3 Specification
Image Sensor
Sensor
High Definition Color CMOS Sensor
Display Resolution
2.0 Megapixels
Min. Illumination
0 Lux (With IR Illuminator)
Lens
Lens Type
Glass Lens
Focal Length
f: 4mm
Aperture
F2.0
Angle of View
When f=4mm, Horizontal≧60°
Video
Image Compression
H.264
Image Frame Rate
30fps (60Hz), 25fps (50Hz), downward adjustable
Resolution
2.0 Megapixels (1920 * 1080)
4.0 Megapixels (2560 * 1440)
VGA (640 * 480), QVGA (320 * 240)
Stream
dual stream
Image Adjustment
The hue, brightness, contrast, saturation, sharpness are
adjustable
Flip Image
flip and mirror
Infrared Mode
Automatic or manual
IR Range
Infrared lamp array, IR LEDs for IR range up to 10 meters