Section6 OSD
If you have added time and camera name in the video, you can see it in the live window.
Go to Settings > Basic Settings > Camera name panel, and you can change another device name. The
default device name is anonymous.
Go to Settings > Basic Settings > Camera time panel and adjust the device time.
Go to Settings > Video > On Screen Display panel, you can add or no add OSD.
Section7 Play / Stop / Snap / Record / Full screen button
1----- Play Click it to play the video of the camera
2----- Stop Click it to stop the video of the camera
3----- Snap Click it to make snapshot and it pop up a window which picture you snapshot, right click in the
window and save the picture to anywhere you want.
4----- Record Click the icon and the camera start recording, you can see a green dot in the live window.
Click again and stop recording. The default storage path is C:\IPCamRecord. You can change the storage path:
Go to Settings > Record > Storage Location panel.
5----- Full Screen Click it to make full-screen, or you can double click the surveillance screen to make
full-screen. Double click again and exit full-screen.
Onscreen Mouse Control
Right click the mouse and you can adjust the screen ration, full screen and Zoom up.
To Next Page
Loading...
