4.3.8 Onvif
On this page, you can enable the Onvif port and RTSP port. ONVIF(Open Network Video Interface Forum)
is a standard for talking to Network Camera Devices and other similar security hardware.
ONVIF port: By default, the ONVIF port is set to 888. Also, they can be assigned with another port number
between 1 and 65535(except 0 and 65534). But make sure they can not be conflict with other existing ports.
RTSP port: The default port is 554.
4.4 Video
This section allows you to configure Video stream settings, On screen display and Snapshot settings.
4.4.1 Video Settings
There are two ways to set the stream video settings. They are main stream video settings and sub stream
video settings.
To Next Page
Loading...
